- Spring Bearing Industrial Inc >
- Thin Wall Bearing >
- Thin Section Bearing
Thin Section Bearing
Product Detail
Thin Section Bearing
Structures:Deep groove,4-point contact and angular contact.
Rolling type:Ball (GCR15,AISI440,Si3N4 ceramic).
Material of races:Chrome steel GCr15 or stainless steel.
Cage:Brass,PTFE,PEEK etc.
Others,
The 6000 Series, and Kaydon size extra light bearings are normally used in applications where space limitations are a primary consideration and shaft sizes are relatively large. The 6200 Series bearings feature deep, honed raceways, resulting in a perfectly balanced bearing. Functionally similar to the 6200 series, the 6300 Series is produced with a larger ball complement and heavier races allowing greater radial, thrust and combined load capacity for a given bore size. The 6700 series has a small cross-sectional area allowing these bearings to require low running torque. The deep thin-walled ball bearings of SS6800 & SS6900 series will bear moderate axial load as well as radial load. These sizes have a lower coeficiancy of friction and higher speed rating compared to other ball bearing types of the same size. When the use of a thrust type ball bearing is not suitable due to high speeds the SS6800 & SS6900 series can be used to bear pure axial loads.
Bronze, plastic/polymer and ceramic bearings available upon request.
Mobile:
Email:
Fax:
